Long Travel Kit

• Wheel Travel: 13.25”
• Amount of Lift: 0-4”
• Track Width: 3” wider per side
• Maximum Tire Size: 35”
• Maximum Backspacing: 4.75”
• Minimum Rim Size: 17”
• Bump Stop Size: 2.0” x 2.0” (view spec sheet)
• Coilover Shock Size (w/ Shock Hoops): 2.5"x8"
• Coilover Shock Size (w/ Facotry Mounting): King OEM replacement shocks with the options below
  • Internal droop stops removed
  • +1” rod ends

Shocks
For the best performance and to achieve the full 13.25” of travel you must purchase our spec built shocks or have them custom built based on our coil over spec sheet. For direct bolt on applications King OEM replacement coil overs can be installed, but you will have to delete the factory coil bucket and build a custom shock hoop to use our spec built shocks. The King OEM replacement coil overs must have the internal droop stops removed and 1” rod end extensions added. These shocks will allow for 10” of travel. Both pairs of shocks will work with 2WD or 4WD models. For more dampening the suspension system has the ability to use bump stops along with the coil overs. The use of bump stops will also require welding and modifications to the frame.

Wheel Travel
When shopping long travel kits many consumers tend to focus just on travel numbers. This is the reason many companies claim inaccurate numbers or don’t disclose the amount of work involved to achieve these numbers. Our goal is to build a suspension system with the highest amount of wheel travel without requiring major modifications to the vehicle or compromising its overall drivability.

Tire Info
When using 35” tires with this kit modifications to the wheel well will need to be made. The firewall pinch weld will need to be folded over and front cab mount needs to be shaved to avoid contact while turning. The upper wheel well will also need to be modified to avoid contact at full bump.    

• Chromoly upper control arms 
• Boxed plate lower control arms
• 9" quad wrapped limit straps
• Weld on adjustable limit strap mounts
• 17-4 stainless steel misalignment spacers
• 17-4 stainless steel tie rod extensions
• DOT approved extended brake lines 
• Grade 8 mounting hardware

• Bolt on application, minimal modifications required
  
• Utilizes Probearings bearings
• 4130 chromoly uniball cups
• ¾” heims for the UCA’s
• Delrin bushings for the LCA’s
• Zinc plated inner bushing sleeves
• Grease fittings for easy servicing             
• 3/16" and 1/8” boxed plate construction
• Internally ribbed with extrusions for weight reduction
• Limit strap tabbing
• Bump stop plating

2004-2015 Nissan Titan 2WD / 4WD 
2016-2023 Nissan Titan (Non-XD) 2WD / 4WD
*This suspension will not work with the 2016 or newer Titan XD models.
*Complete axle assemblies are not available for 2016-2023 models. Please reach out to our Builds Department (619-567-6240, [email protected]) if you wish to purchase complete axle assemblies for your 2016-2023 Titan.
*Please contact us if you plan on installing this kit with lift spindles or a bracket lift.

*This product is designed to pair with OEM and Dirt King parts. Compatibility with other brands must be approved by the respective manufacturer.